Skip to content

Overview The 90-degree compression fittings and the assembly procedure for high-pressure grease hose:

For those industries that rely on heavy machinery and equipment, lubrication is key to extending service life. High-pressure grease hoses work their way into difficult-to-reach areas, providing that lubrication; but the correct fittings are just as important to ensure a leak-free, efficient system. Fat Adder provides 90-degree compression fittings specific for both 11.3mm and 8.6mm high-pressure hoses. Those applications demand not only flexibility but durability, too.

In this blog, we'll delve more deeply into how to use 90-degree compression fittings, nuts, and olives, and share best practices for assembling a high-pressure grease hose that optimizes your lubrication system.

Why 90-Degree Compression Fittings Are Essential for Grease Systems

In any lubrication system, but mainly for high-pressure applications, one wants to ensure that the connections are secure. Compression fittings are one such way to reliably obtain leak-free seals. The 90-degree design permits more flexible installation in tight or angular spots. From 6mm to 8mm to 10mm stainless tubes, these fittings will keep your connections tight.

Key Benefits:
Flexibility: 90-degree fittings allow for easier installation in confined spaces or when an angled connection is required.
Leak-Proof: It is designed to form a tight and secure seal that would not cause leaking in heavy pressure applications.
Durability: Constructed from stainless steel and other strong materials, these fittings can bear very high pressure and corrosive damage in an unforgiving atmosphere.
Types of 90-Degree Compression Fittings Offered by Fat Adder

Fat Adder offers a wide range of 90-degree compression fittings for every hose size and different applications. Some of the important products available at your doorstep for your lubrication system include

6mm, 8mm and 10mm Tubes:
CF906M - M6 x 6mm tube compression fitting 90
CF908M - M8 x 6mm tube compression fitting 90
CF9010M - M10 x 6mm tube compression fitting 90
BSP and NPT Connections
CF901/8BSP - 1/8 BSP x 6mm tube compression fitting 90
CF901/4BSP - 1/4 BSP x 6mm tube compression fitting 90
CF901/8NPT - 1/8 NPT x 6mm tube compression fitting 90
Larger Tubes
CF90881/4BSP - 1/4 BSP x 8mm tube compression fitting 90.
CF90101/4: 90-degree 1/4 BSP x 10mm tube compression fitting.
CF90J6MM, CF90J8MM, CF90J10MM: The 90-degree compression fitting joiners come with the respective size of tubes-6mm, 8mm, and 10mm.
Many of these fittings also come in stainless steel versions for applications that demand increased strength and anti-corrosive qualities.

Compression Nuts and Olives to Ensure Secure Connections

Besides the compression fittings, one would also need good-quality nuts and olives to provide a leak-free and secure connection in the grease line system. The FAT Adder group provides various sorts of compression nuts and olives with both normal and stainless steel to meet individual tube sizes and required pressure.

Key Products:
CN 6mm Nut LL & CO 6mm Olive LL: Standard 6mm compression nut and olive in low lead applications.
CNSS 6mm Nut (LL) & COSS 6mm Olive (LL): Versions in stainless steel, useful in offering greater corrosion resistance.
CN-8 8mm Nut (LL) & CO-8 8mm Olive (LL): Standard 8mm compression nut and olive for systems at high pressure.
CN-8-L-SS 8mm Nut (L) & CO-8-L-SS 8mm Olive (L): Stainless steel variants, used whenever extra strength and durability may be desirable.
Best Practices for Assembling High-Pressure Grease Hoses

High-pressure grease hoses call for proper assembly to avoid leakage, contamination, and malfunctioning systems. Here are some best practices in properly assembling your hoses and fittings:

Cleanliness is Key: Always clean all components thoroughly before assembling. These might just be small dirt or debris that may lead to possible bearing damage or poor performance of the lubrication system.

Cut Tubing Correctly: Grease tubing should always be cut squarely and cleanly with a sharp tube cutter. Poor cuts can lead to bad connections and leaks.

Lubricate Components: Before assembly, lubricate screw sleeves and threads on hose studs for a secure, tight fit without damage during installation.

Tighten Fittings Properly: While assembling the compression fittings, it is very important that the fittings are securely tightened. Sometimes over-tightening may result in damage to the fitting or hose.

This will be helpful in optimizing a grease line system for reliability and efficiency over an extended period of time.

Why Fat Adder's 90-Degree Compression Fittings and Accessories Are the Best Choice

Fat Adder's 90-degree compression fittings, nuts, and olives have been manufactured for ultimate reliability in the heavy-duty industry. For new installations or retrofits, these components will ensure that all connections are tight, leak-free, and able to resist even extreme environmental conditions.

Key Features:
High Durability: Fabricated from high-quality materials such as stainless steel, these fittings resist corrosion and wear for long performance.
Diversity means that with the different sizes and various configurations, the compression fittings from Fat Adder can work on many industrial applications.
Ease of Installation: Easy to use, these fittings make the installation and maintenance of your lubrication system quick and easy.
Conclusion: Give your lubrication system the performance boost it needs with the 90-degree compression fittings offered by Fat Adder.

Compression fittings, nuts, and olives from Fat Adder are all manufactured at 90-degree angles to ensure the correct solution for safe and efficient grease line systems. Looking for durable fittings for 6mm, 8mm, or 10mm tubes, or would you rather have components compatible with BSP or NPT? Fat Adder has them all.

For more information or to request a quote, visit www.remotegreaselines.com or call 1300 917 946 to speak with one of our product experts.
Previous article A Guide to Straight Adaptors and Extensions for Industrial Lubrication Systems
Next article 11.3mm High-Pressure Hoses and Hose Studs for Industrial Lubrication Systems: A Guide

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare