Skip to content

A Complete Guide on Grease Nipples for Industrial Lubrication Systems

The most important small components in every industry's lubrication system are grease nipples, also known as grease fittings. Small components are needed to help in making every grease distribution to machinery work efficiently, preventing wear and tear, and giving a longer life span to the machineries. Fat Adder offers a wide range of grease nipples, from stainless steel to high-pressure, for so many kinds of industrial applications.

We take a look in this article at the different types of grease nipples available, their applications, and why picking the right grease nipple is important in order to have an efficient and reliable lubrication system.

Why Grease Nipples Are an Essential Element for Lubrication Systems

Grease nipples allow entry into the bearings and other moving parts for grease to enable machinery to run smoothly and efficiently. They are designed with a secure and leak-proof connection between the grease gun and machinery for continuous lubrication without the chance of contamination.

Key Benefits:
Safe Grease Delivery: The grease nipple can ensure that a lubrication system safely delivers grease into whatever kind of system and complements the lubrication of all critical components.
Leak-Proof Connection: The Grease Nipple keeps dirt, water, and other types of contaminants from the system because of the tight seal that could ensure no leakages.
Variety of Configurations: Grease nipples also come in straight, 45-degree, and 90-degree configurations to provide service in even the most difficult-to-reach lubrication point.
Grease Nipples Types from Fat Adder

Fat Adder provides all types of grease nipples intended for different industrial lubrication systems. You may have standard, high-pressure, or even stainless steel fittings to ensure that the delivery of grease is appropriately done.

6mm Grease Nipples:
GN6MMSTR: Straight 6mm x 1.0mm grease nipple.
GN6MM90: 90-degree 6mm x 1.0mm grease nipple.
GN6MM45: 45-degree 6mm x 1.0mm grease nipple.
GN6MMSTRSS: Stainless straight 6mm x 1.0mm grease nipple.
GN6MM90SS: Stainless 90-degree 6mm x 1.0mm grease nipple.
GN6MM45SS: Stainless 45-degree 6mm x 1.0mm grease nipple.
These 6mm grease nipples are suitable for use where smaller diameter grease lines are in place and provide multiple configurations for a variety of installation requirements.
 
10mm and High-Pressure Grease Nipples:
GN10MMSTR: Straight 10mm x 1.0mm grease nipple.
GN10MMSTR-HP: Straight high-pressure 10mm x 1.0mm grease nipple with red dust cap for lubrication systems.
These nipples possess a high-pressure design used for systems needing robust performances to offer efficient grease delivery under the conditions of higher pressure.

1/8 BSP Grease Nipples:
GN1/8BSPSTR-Straight 1/8 BSP Grease Nipple
GN1/8BSPSTR-HP-Straight High-Pressure 1/8 BSP Grease Nipple with Red Dust Cap, Lubrication Systems
GN1/8BSP45-45 degree 1/8 BSP Grease Nipple
GN1/8BSP90-90 degree 1/8 BSP Grease Nipple
GN1/8BSP90SS-Stainless 90 degree 1/8 BSP Grease Nipple.
These are standard and high-pressure 1/8 BSP nipples that will suit a wide range of industrial lubrication systems.

1/4 BSP Grease Nipples:
GN1/4BSPSTR: Straight 1/4 BSP grease nipple.
GN1/4BSPSTRSS: Stainless straight 1/4 BSP grease nipple.
Larger grease nipples, such as those made to the 1/4 BSP pattern, are suited to heavier applications requiring greater amounts of grease flow to keep the equipment operational.

Selecting Between Standard and High-Pressure Grease Nipples

It is vital to choose the right type of grease nipple for your system, based on the lubrication requirements of your machinery. High-Pressure Grease Nipples offer the possibility of working in extreme conditions without leaking or failing due to high operating pressures. They are a must in systems whose operating conditions call for them.

Standard Grease Nipples: These are meant for general lubrication needs where the pressure applied is at average levels and there are no extreme conditions.
High-Pressure Grease Nipples: These are for those systems that require more lubrication under high-pressure conditions and allow for the continuity of the grease to all vital parts of the system.
If you are not sure about the type of grease nipple to be used in your system, it is always advisable to approach a lubrication expert so that your system works according to the best standards.

Why Stainless Steel Grease Nipples Are Best for Hostile Environments

The nipples, therefore, made from stainless steel are more resistant to corrosion and ideal, hence, for usage in moist, chemical, or high-temperature environments. With these fittings, you are guaranteed of long-lasting durability that will keep your lubrication system running dependably under even the most intense conditions.

Key Benefits:

Corrosion Resistance: Stainless steel grease nipples resist rust and corrosion, adding longer life to a lubrication system.
Durability: Manufactured not to wear off due to the harsh conditions of the industrial environment, a stainless steel fitting is bound to last long.
Versatility: The stainless steel grease nipples start from variations of straight through 45-degree and all the way to 90-degree configurations, hence allowing flexibility of a system under design.
Why Fat Adder Grease Nipples Are the Best Choice for Your Lubrication System

The wide series of grease nipples developed by Fat Adder will meet all the needs and requirements of any industrial lubrication system. Whether it is for standard, high-pressure, or even stainless steel fittings, such fittings will surely provide the level of reliability and efficiency that you will need to keep your machinery working properly.

Key Features:
Variety of Configurations: Three common designs come from Fat Adder for its grease nipples: straight, 45-degree, and 90-degree-to make sure these nipples can be installed in even the most inaccessible areas.
Durable Materials: The grease nipples will be manufactured from durable, high-quality materials such as stainless steel to ensure very long performance even in harsh environments.
High-Pressure Options: High-pressure grease nipples avail a fitting for those systems that require stronger ones, ensuring the customer that lubrication will be well delivered without leaks or failures.
Conclusion: Ensure Peak Performance with Fat Adder's Grease Nipples

There's a grease nipple to suit your lubrication system that will help to keep your machinery healthy and running efficiently. From High-Pressure to Stainless Steel, the diverse range of Fat Adder Grease Nipples delivers on the robustness and dependability needed from this industrial application.

For more information, to request a quote, visit www.remotegreaselines.com or call 1300 917 946 to speak to a product specialist.
Previous article The key tools to care for an industrial grease system: tube cutters, grease guns, and so on.
Next article Dust Covers, Swivel Unions and Bulkheads: Important Components of the Grease System

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare