SYSTEM OPTIONS
6mm Nylon Tube with Compression Fitting
6mm nylon tube and compression fittings features:
- Rated to 1,291PSI (89 Bar, 8.9MPa)
- Budget and cost effective
- 6mm olive within the compression fitting clamps around 6mm tube once tightened seals system
- Tube lengths up to 2m can be achieved with an electric grease gun and up to 3m can be achieved by slowly and carefully greasing manually or using a grease divider valve
- Ideal for mild to moderate environments
- Fittings are also available in stainless steel
6mm Nylon Tube with Push-In Fittings
6mm nylon tube and push-in fittings features:
- Rated to 1,291PSI (89 Bar, 8.9MPa)
- Quick installation
- Quick disconnect if required
- 90 deg swivel fittings are available making installation in tight spaces easy
- Tube lengths up to 2m can be achieved with an electric grease gun and up to 3m can be achieved by slowly and carefully greasing manually or using a grease divider valve
- Ideal for mild to moderate environments
6mm, 8mm and 10mm Stainless Rigid Tube
6mm, 8mm and 10mm stainless ridged tube features:
- Rated to 5,438PSI (374Bar, 37.4MPa)
- Tube lengths up to 15m can be achieved with 10mm
- Ideal for extreme environments (ie corrosive)
- Can be used with normal steel compression fittings
8.6mm and 11.3mm High Pressure Tube with Field Adaptable Reusable Fittings
8.6mm and 11.3mm high pressure tube with fittings:
- Rated to 12,184PSI (840 Bar, 84MPa)
- Field adaptable and easy installation
- Extreme high pressure
- Tube lengths up to 18m (11.3mm)
- Ideal for extreme environments
- 8.6mm fittings available in stainless Note: 11.3mm is only available with compression fitting, hose tail and screw Sleeve (1). Not available in JIC or Swivel.